Finished concrete driveway with a clean broom finish sloping correctly toward the street

Concrete driveways

Concrete Driveway Contractors in Fresno, CA

A driveway needs to do more than look clean on pour day. It has to support the vehicles that use it, connect naturally to your property, and send rainwater somewhere it will not create trouble. Communion Concrete installs and replaces residential concrete driveways in Fresno, Clovis, Madera and surrounding communities, with the ground and drainage considered before a new slab is poured.

We take on new driveway pours, complete tear-out and replacement, driveway widening and extensions, additional off-street parking areas, and replacement of individual failed driveway panels. Our owner-run approach starts with an on-site look at the property and a written slope-and-drainage plan for every new pour.

Need a driveway estimate? Request a free on-site visit. We'll look at the existing concrete, the intended vehicle use, access, and the way water moves across the lot before developing the scope.

Driveway services

What does your driveway need?

Not every driveway problem calls for the same job. One homeowner needs a new approach where there has never been concrete. Another has a usable driveway but needs more room to park. Another has one broken section, while the remaining driveway is sound.

01

New concrete driveway installation

A new driveway establishes the route from the street or parking area to your home. The layout should account for how vehicles will enter, turn, and park, along with the grade of the property and the ground underneath the slab. On a new pour, Communion Concrete provides a written slope-and-drainage plan before work proceeds.

02

Concrete driveway replacement

Some existing driveways have widespread cracking, uneven sections, recurring puddles, or a base that no longer supports the slab properly. Full replacement allows the old concrete to be removed so the exposed ground can be evaluated and prepared before the new driveway is formed and poured. Our replacement scope includes demolition, haul-away, base correction, and new concrete work.

03

Driveway extensions and widening

If parking is tight, a properly planned extension or widened section can create more usable space without replacing an entire driveway. The new concrete must work with the elevation and drainage of the existing surface. We assess those transitions during the lot visit rather than assuming a new section can simply be added at the same height.

04

Partial driveway panel replacement

When only one part of a driveway has failed, replacing the affected panel may be an alternative to replacing everything. The important question is why that area moved or cracked. A new panel over the same unresolved problem may eventually develop similar damage.

05

Additional off-street parking areas

Communion Concrete also accepts concrete work for additional off-street parking. The intended use, access, grading, and connection to other paved surfaces all affect the plan. The site visit helps determine the appropriate scope for the property.

Below the surface

The problems beneath cracked or uneven concrete

Visible damage does not always tell the full story. During old driveway removal, Communion Concrete has encountered large tree roots and saturated subgrade. Both are useful examples of why the condition beneath a slab matters.

Concrete being screeded inside driveway forms

Roots and lifted sections

Growing tree roots may contribute to movement or cracking in nearby concrete. Removing and replacing the visible slab alone does not explain how the surrounding ground and roots should be handled. The affected area needs to be assessed before the replacement work is defined.

Soft or water-affected ground

A driveway may settle or crack when the supporting ground is unstable. Saturated subgrade is one issue we have observed during tear-outs. The condition of the base matters because the new surface depends on what supports it.

Water pooling or flowing toward the home

A driveway is a hard surface that redirects rainwater. Even a smooth finish will not correct a poor grade. An on-site review should consider where runoff starts, how it crosses the driveway, and where it can discharge.

Uneven panels and changes in elevation

An offset between sections can affect driving comfort and create a trip hazard. The repair decision depends on how much of the driveway is affected and whether the underlying cause can be addressed.

The Ground-First Pour

Why the slope plan comes before the concrete truck

Our Ground-First Pour approach emphasizes reading the lot before assigning a final scope. Fresno-area properties do not all have the same surface grades or soil conditions, so a plan that works on one lot should not be copied blindly to another.

For every new pour, Communion Concrete provides a written slope-and-drainage plan. That plan helps identify the intended direction of surface water and guides the setup before concrete placement. This does not mean every drainage issue can be solved with concrete alone. It means water movement is addressed as part of the driveway decision, not left to chance after the slab is finished.

How the Ground-First Pour works

  1. Step 1

    Walk and read the property

    Jose walks the lot with you before a price is set. The visit considers driveway conditions, access, the intended layout, and how water moves across the property.

  2. Step 2

    Plan the slope

    For new pours, you receive the slope-and-drainage plan in writing. The plan is meant to guide the layout and surface elevations before concrete work begins.

  3. Step 3

    Prepare, form and pour

    The crew completes the work included in the agreed scope, including removal and base work when replacement is necessary. The new concrete is then formed, placed and finished to the plan.

  4. Step 4

    Walk the finished job together

    A final walk-around lets you review the completed work and receive guidance on when the new surface can be used. See the full process for more detail.

Scope

What is included in a driveway project?

The exact written scope depends on whether the job involves new installation, an extension, a failed panel, or a complete replacement. A typical replacement includes:

The written scope should make clear which parts apply to the individual project. A small addition and a full tear-out are not interchangeable jobs.

  • An on-site lot review and project discussion
  • A written slope-and-drainage plan for the new pour
  • Removal and haul-away of the old concrete where replacement is needed
  • Ground and base preparation appropriate to the exposed conditions
  • Planning of vehicle use, layout, thickness and reinforcement before placement
  • Forming, pouring and finishing the new concrete
  • A final walk-around with the homeowner

Cost

How much does a concrete driveway cost in Fresno?

There is no single trustworthy price for every driveway. An estimate depends on the property and the work actually needed. Important cost factors include the amount of concrete being installed or removed, demolition and haul-away, ground correction, drainage and grading, vehicle needs, chosen finish, and jobsite access.

A driveway extension may have different preparation costs from a full replacement. A slab removed over wet or unstable material may also reveal work that was not visible from the surface. Communion Concrete offers a free on-site estimate so those conditions can be discussed before a final scope is agreed upon. Our pricing page explains the main cost drivers.

When comparing proposals, ask what each quote includes for removal, base preparation, grading, new concrete, and cleanup. A lower number is not necessarily a better value if essential work has been left out.

Timeline

How long does the job take?

Many replacements take a few working days on site for removal, preparation, forming, pouring and finishing, followed by curing time before vehicle use. We work by appointment, Friday through Sunday.

New projects are typically booked about 2–4 days ahead, but that is an availability estimate, not a guaranteed start date or completion time. The actual schedule and expected return-to-use dates are set for your specific project. Weather, concrete conditions, vehicle weight, and the work required can affect those dates.

FAQ

Questions homeowners ask about concrete driveways

Service area

Concrete driveway service in Fresno, Clovis and Madera

Communion Concrete is an owner-run concrete flatwork business serving Fresno, Clovis, Madera and surrounding communities. We are a service-area business rather than a public walk-in location, with appointments scheduled Friday through Sunday.

Local homeowners often want to know whether a contractor will account for ground conditions and rainwater before pouring. The Ground-First Pour process makes those considerations central to the conversation about a new driveway.

Request your free on-site driveway estimate

If your driveway is cracked, uneven, too narrow, or no longer works for your parking needs, Communion Concrete can assess the property and discuss the appropriate scope. Ask about a new concrete driveway, full replacement, widening, an extension, additional parking, or individual panel replacement in Fresno, CA and nearby service areas.

(559) 206-3347 · communionconcrete@outlook.com · By appointment, Friday–Sunday